EDGEMODDERS / ANYONE CAN MOD
Wiki / EDGEwave

Install and set up EDGEwave

EDGEwave is an extension for VS Code, the free code editor from Microsoft. You don’t write code in it: EDGEwave adds its own panels and a sound editor.

The short way, if you start from nothing:

  1. Install VS Code, then EDGEwave, as below. That installs REDcode too.
  2. On its first start REDcode finds your game and offers Install REDbridge: press it. REDbridge is the small program that reads the game’s files. See Install and set up REDcode.

Or get the EDGEkit app, one editor with REDcode, EDGEwave and the other EDGE tools already inside. New to EDGE altogether? Start at Getting started.

On this page  
What you need The game, VS Code, REDcode, and what is optional
Install EDGEwave From the Extensions view, and other ways
First start The two views, and what you should see
Try it: hear a game sound One minute, changes nothing
Where EDGEwave keeps things In your project, on your PC, in the game
Updating and removing  
Next Your first sound mod

What you need

You need Notes
Cyberpunk 2077 on Windows Steam, GOG or Epic. EDGEwave reads the game’s own sounds and ships none of them
VS Code 1.90 or later Or the EDGEkit app, which has EDGEwave built in
REDcode 0.10.3 or later, set up with REDbridge Installed with EDGEwave. EDGEwave reads every game sound through it, and does not run without it
A project A folder that holds your mod’s files. REDcode’s New Project makes one (Projects). EDGEwave saves your sounds into it, and REDcode packs it into a mod. You can listen to game sounds without one
Optional: REDnode in the game For Play in the Game, for sounds that REDnode mods play, and for EDGEwave Voice. Not needed to replace a game sound
Optional: an ElevenLabs account and API key Only for the voice tools. Each use spends your ElevenLabs credits. Everything else works without one

Install EDGEwave

EDGEwave is on the VS Code Marketplace, published by Edgemodders. It is marked Preview: it is new, so expect rough edges.

  1. In VS Code, open the Extensions view (Ctrl+Shift+X).
  2. Search for EDGEwave.
  3. Pick EDGEwave by Edgemodders and press Install. VS Code installs REDcode for Cyberpunk 2077 with it, if you don’t have it yet.

The same listing is on the web: EDGEwave on the VS Code Marketplace. If you prefer a terminal:

code --install-extension edgemodders.edgewave

Other ways to install

Way When How
Open VSX Your editor is built on VS Code but uses Open VSX instead of Microsoft’s Marketplace, such as VSCodium Search for EDGEwave in the editor’s Extensions view, or see EDGEwave on Open VSX
The EDGEkit app You want one editor with the EDGE tools built in The EDGEkit app comes with EDGEwave
A .vsix file No store access, or you want one exact version Download edgewave-<version>.vsix from the releases page or from Nexus Mods. In the Extensions view, press the ... menu at the top right, choose Install from VSIX… and pick the file. EDGEwave needs REDcode: if your editor doesn’t fetch it, install REDcode first

First start

An EDGEwave icon appears in the activity bar, the strip of icons down the far left edge of VS Code. Click it. EDGEwave’s sidebar has two views:

View What it is
Sounds Your own work: the sound documents in your project, the sounds you put into the project, and the ones you opened lately. Empty at first. See The Sounds view
Game Assets The game’s sounds, and nothing else: sound effects, voice lines and music. See Find and play sounds
What you should see  
Sounds “No sound documents yet, in this folder or opened lately.”, with the buttons Create a Sound… and Open Sound…
Game Assets Three groups: Sound effects, Voice lines, Music and streamed sounds

Game Assets reads the game through REDcode. If a group says “REDcode’s REDbridge is not running”, open a REDcode project, or finish REDcode’s setup (Install and set up REDcode). More cases are in Troubleshooting.

Try it: hear a game sound

  1. Open a REDcode project, or make one: press Ctrl+Shift+P, run REDcode: New Project, name it my_sounds and choose a folder outside the game folder.
  2. Click EDGEwave’s icon. Move the mouse over the Game Assets view and press the funnel icon in its title bar (Filter the Game’s Sounds).
  3. Type katana equip and press Enter.
  4. Under Sound effects, move the mouse over w_melee_katana_equip and press the ▶ that appears on the row.
What you should see  
After step 3 A short list of events under Sound effects, each with its number of variations
After step 4 You hear V draw a katana. No tab opens. The status bar, the strip at the bottom of VS Code, says EDGEwave: playing w_melee_katana_equip, with the recording’s number. Press ▶ again to stop a long sound

Press ▶ a few more times: the event has several recordings, and EDGEwave picks one each time, as the game does. Nothing is changed by listening. To see every sound again, press Clear the Filter in the view’s title bar.

Where EDGEwave keeps things

In your project. Everything you make is in the project’s source folder. source\raw is the project’s folder for working files: it is yours to keep and share, and is not packed into the mod.

What Where in the project
A game sound effect you opened source\raw\sfx\<event>\<hash>.edgewave, and its WAV beside it when you render
A game voice line you opened The line’s own game path under source\raw, with .edgewave added, and its WAV beside it
A new sound made with Create a Sound source\raw\edgewave\sounds\<name>.edgewave, unless you choose another place
Sound files you dropped in from the desktop <name>.sounds, a folder beside the sound document
Sounds and lines made by the voice tools <name>.gen, a folder beside the sound document
A quest’s voiced lines source\raw\edgewave\voice\<quest>
What Add to Project writes for the game source\archive, source\customSounds and source\resources. See Into the game

A sound file from your PC gets its .edgewave document beside it. Rendering a .wav writes <name>.edit.wav, so your original is kept. With no project open, EDGEwave asks where to keep a sound’s document.

On your PC. %LOCALAPPDATA%\EDGEwave holds two things, both safe to delete: events.json, the list of the game’s sound event names that EDGEwave reads from your game, and mcp, the program AI assistants use to reach EDGEwave (Assistants). EDGEwave makes both again. Your ElevenLabs key is not in a file: VS Code keeps it in its secret storage (Voice tools).

In the game folder. Nothing, with two exceptions that you choose yourself: a REDnode package made with New package in the game folder… (Into the game), and EDGEwave Voice (Voices for quests and mods). Your mod itself goes into the game through REDcode’s Pack and Install.

Updating and removing

Installed from the Marketplace or Open VSX, EDGEwave updates like any other extension: VS Code fetches new versions by itself unless you turned automatic updates off. If you installed from a .vsix file, install the newer file the same way. Your projects and settings stay either way.

To remove EDGEwave, uninstall it in the Extensions view. If you set an ElevenLabs key, run EDGEwave: Clear ElevenLabs API Key first. Uninstalling leaves %LOCALAPPDATA%\EDGEwave and your projects behind: delete the first by hand if you want it gone. A mod you installed stays in the game until you take it out.

Next

  1. Follow Tutorial: your first sound mod: about 20 minutes, no account needed.
  2. Then read Edit and mix and try the other effects.
  3. Problems? See Troubleshooting, or tell us on EDGEwave’s issues page or the EDGEmodders Discord.

Last reviewed 2026-11-13. Something wrong or missing? Tell us on Discord or open an issue.