EDGEMODDERS / ANYONE CAN MOD
Wiki / EDGEhack

Change a game quickhack

In this walk-through you make the game’s own Overheat cost 1 RAM less on every tier, and see the new cost in the game. It is the simplest job EDGEhack does, and every other job builds on it.

   
Time About five minutes, plus the game starting
Before you start EDGEhack and REDcode are installed, and a project is open in REDcode (Install and set up). No project yet? Run REDcode: New Project: see Make a new project
In the game TweakXL, for the finished mod. REDnode, if you want to see the change without restarting the game. See What each feature needs
On this page  
1. Open Overheat Read it first
2. Press Edit The same page, with fields
3. Lower the RAM One tier, then all of them
4. Save EDGEhack writes the mod’s file
5. See it in the game Two ways
Put it back, Try next  

Two words first. A quickhack comes in tiers: Overheat has six, from Common to Legendary++, and each has its own numbers. RAM is what a quickhack costs V to use.

1. Open Overheat

  1. Click EDGEhack’s icon in the activity bar, the strip of icons down the left edge of VS Code.
  2. In the Quickhacks view, open People, then Damage Hack.
  3. Click Overheat.

You should see a tab with Overheat’s six tiers and what each one does. This page is read-only.

2. Press Edit

Press Edit… near the top of the page.

What you should see  
A new tab The editor: Texts and Icons at the top, then a Numbers table with a column for each tier
Under the title “A change to the game’s Overheat. Empty fields keep the game’s value.”
In EDGEhack’s Desk view A Project group with one row: Overheat, marked changes Overheat

EDGEhack has made a small file in your project for this change. It calls that file a document. There is one per quickhack you change, so pressing Edit… on Overheat again opens this same one.

3. Lower the RAM

Every field in the Numbers table is empty and shows the game’s value in grey. An empty field means “keep the game’s value”.

  1. Click Rare at the top of its column. That selects the Rare tier.
  2. In the RAM row, click the Rare field and type a number 1 less than the grey one. If the grey number is 8, type 7.
  3. Press All tiers, the small button on the RAM row.
What you should see  
After step 2 The Rare field highlighted as changed
After step 3 Every tier’s RAM field filled, each 1 less than its own grey value

All tiers copies the selected tier’s change, not its number. Rare went down by 1, so every tier goes down by 1 from its own value, and the tiers keep their spread. That is why you select Rare in step 1: All tiers always works from the selected tier.

4. Save

Press Ctrl+S.

You should see the line under the title change to “Saved:” and a file name ending in .yaml, under source\resources\r6\tweaks in your project. That file is the whole mod so far: a few lines for TweakXL, the framework that changes the game’s numbers. You never need to open it.

5. See it in the game

Pick one way.

  Try Live Pack and Play
What it does Sends the change into the running game Packs the project and installs it as a mod
The game Running, with a save loaded Closed. Start it afterwards
Needs REDnode in the game TweakXL in the game, and EDGEdeck if you use it
The change stays Until you press Stop or close the game Until you uninstall the mod

With Try Live:

  1. Start the game and load a save.
  2. On the editor page, press Try Live.
  3. The first time, the game shows REDnode’s Editor request window, asking whether EDGEhack may change the game. Press Allow. If you don’t see the window, press F10.

The line under the title now reads “Trying it live” with a count of changes in the game.

With Pack and Play:

  1. Close the game.
  2. On the editor page, press Pack and Play.
  3. Start the game and load a save.

Then, either way, scan an enemy with Overheat in V’s cyberdeck, and look at its RAM cost in the quickhack list.

What you should see  
Overheat’s RAM cost 1 less than before. V’s perks and cyberdeck can lower the cost further, so compare with what it showed before your change, not with the grey number on the page

V has no Overheat? With REDnode, open its launcher (F10), switch on Console, and run this line. It puts the Rare tier in V’s backpack. Then slot it into the cyberdeck:

await game.player.addItem("Items.OverheatLvl2Program")

Put it back

To undo Do this
Try Live Press Stop on the page. The game’s numbers go back
One number Clear its field, or type the grey value, and save. The change is taken out of the document
The whole change In the Desk view’s Project group, hover Overheat and click the trash can (Remove from Project…). The document and its mod file go to the Recycle Bin
The installed mod In REDcode’s Project view, open the ... menu and choose Uninstall: see Uninstall

Try next

  • Change Overheat’s name or description: Texts. These need Pack and Play and a game restart to show.
  • Make a quickhack of your own instead of changing the game’s: Your first quickhack.
  • What every row and button on the page does: The editor.

Last reviewed 2026-11-13. Something wrong or missing? Tell us on Discord or open an issue.