EDGEMODDERS / ANYONE CAN MOD
Wiki / EDGEbuilder

Importing a model

The game’s own models are a lot, but sometimes you want your own: a sign you modelled in Blender, a chair you bought, a prop an AI model maker made for you. Import turns such a model into a prop of the game, in the running game, without a restart. Then you drop it like any other.

On this page  
What you need A project, a permission and a model
Find your model On the Library tab, or by its path
Import it Name, height, solid, and the wait
After the import Drop it, and where its files are
Import it again Change the model, and every copy changes
When it doesn’t work The messages you may see

What you need

   
A REDcode project, open in VS Code The prop’s files go into it, so the prop becomes part of your mod. Without one, Import is greyed out. See REDcode
The Archives permission In REDnode’s Mod Manager, EDGEbuilder, Permissions: switch Allowed on for the line “swapping archives in the game’s mod folder while the game runs”. It lets EDGEbuilder put the new prop into the running game. See Install and set up
A model A GLB file (a 3D model with its textures, in one file), or a prop already on EDGEfab’s Desk
A loaded save The prop goes into the world you are playing

You don’t need to install EDGEfab: the part of it that prepares models comes inside EDGEbuilder.

Find your model

Open the Library tab. Below your scenes and bakes, the tree lists the models EDGEbuilder can import:

In the tree What it is Tag
Your Library’s folders GLB files you keep in the EDGE Library, in their folders glb
**: source\raw** GLB files in the open REDcode project’s source\raw folder, where a project keeps models it hasn’t turned into game files yet glb
EDGEfab’s Desk Props you made or brought in with EDGEfab, already prepared prop, “prepared”

Click one to pick it. The Picked panel says what it is and where Import will put it.

A model somewhere else on your PC: type its full path in the box Import a GLB from anywhere, above the tree, and press Pick. A prop’s .prop.asset folder works there too.

Import it

The Picked panel shows the Import box:

Field What to put
Name The prop’s file name: lowercase, no spaces. Leave it empty to use the file’s name (shown greyed in the box). The same name again replaces the prop: see Import it again
Height, m Only for a model whose file has no real size, such as an AI model maker’s. Leave it empty to keep the size in the file. Blender models usually have a real size
Solid, Solid, a box, Not solid Whether V, bullets and cars stop at it. Solid is right almost always. Solid, a box builds it as many of the game’s own props are, with a separate box. Not solid only draws; V walks through it

Press Import. The busy bar shows each step:

  1. Preparing (a GLB only): its size, which way it faces, simpler versions for far away (levels of detail), and its textures.
  2. Adding the mesh to the project.
  3. Making textures, with a count. This is the long part: about two minutes for a model with large (4096 px) textures, a few seconds for a small one.
  4. Packing the project into its mod, and swapping it into the game. Under a second.

Stop on the busy bar ends an Import within one texture. The project then holds part of the model; import it again to finish.

Screenshot comingImporting a model
The Library tab with a prop on EDGEfab's Desk picked, the Import box below with Name, Height and the three solid choices, and the busy bar making textures.

After the import

When it’s done, EDGEbuilder opens the Assets tab with the new prop picked, and says it is in the game. Press Drop where I look, or use Drop at click, as for anything else (Dropping).

From now on the prop is an asset of your project like any other:

  • It is listed on the Assets tab under your project, so you can drop more copies.
  • Your scenes keep it, and it comes back after a restart: its packed mod stays installed in the game’s archive\pc\mod folder.
  • A bake of a scene with it works like any bake. Ship your project’s mod and the prop goes with it.

The files are in your project: the entity (.ent), the mesh, its materials and textures, under source\archive\<your mod>\props\<name>\. EDGEfab’s Add to Project explains each file.

Import it again

Changed the model? Pick it again, give it the same name, and press Import. EDGEbuilder says it is replacing the earlier one, and every copy you already placed changes in place: you don’t drop them again.

Each Import makes every texture again, so a second Import takes as long as the first.

When it doesn’t work

You see Why Do
Import is greyed out, and “Open a REDcode project to import into” No project is open Open your project in VS Code. Then Refresh on the Bake tab, so EDGEbuilder asks REDcode again
“Not in the game yet” and “Allow Archives in REDnode’s Mod Manager” The prop is in your project and packed, but EDGEbuilder may not put it into the game Allow Archives (see What you need), then press Drop: it puts the prop in and drops it, with no second Import
“The world is not loaded; load a save” No save was loaded when the Import finished Load a save, then press Drop
It stopped, “the project holds part of the model” You pressed Stop Import it again with the same name
“Its file has no real size, so its height … is a guess”, or the prop is very large or very small The file has no real size, as with most AI model makers’ models Import it again with the same name and a Height

More in Troubleshooting.

Try it

  1. Open a REDcode project in VS Code, and load a save.
  2. Put a GLB in the project’s source\raw folder (or make a prop in EDGEfab).
  3. On the Library tab, pick it under **: source\raw**.
  4. Name it my_first_prop, leave the rest, and press Import.
  5. When the Assets tab opens, press Drop where I look. Walk V into it: it stops V.

Last reviewed 2026-11-19. Something wrong or missing? Tell us on Discord or open an issue.